+90 850 549 98 38  ·  [email protected]
Steep — application
Marble Series

Steep

Glazed porcelain tile · Rectified

Interprets the layered texture of natural stone in grey-blue tones; with three finishes for floors and walls, and in matt for façades.

Suitable for floors and walls in bathrooms and kitchens, including kitchen splashbacks, as well as living spaces, hotels, offices and shops. With its matt finish it can also be used outdoors.

Catalogue size
600×1200 · 600×600 · 800×800 mm
Thickness
8 mm
Finish
Matt · Full Lappato · Sugar Effect
Faces (graphics)
5
Technical data sheet
PDF · A4 · TR/EN
Download
Project enquiry

For Architects

Download every face of this product, colour by colour, as textures. The files are suitable for SketchUp, Lumion and similar visualisation tools.

Resolution: 600×1200 px · 1 px ≈ 1 mm at real scale · 5 files

For close-up renders in V-Ray, Corona and similar engines, request high-resolution textures.

Faces · 5 Faces

Each tile carries a different face of the design. For a natural look, mix tiles from different boxes during installation.

Overview

Product type
Glazed porcelain tile
Series
Marble
Colour family
Grey
Application
Indoor and outdoor; floors and walls; façades
Edges
Rectified
Shade / pattern variation
V3 · Moderate variation
Noticeable veining, pattern and shade changes from tile to tile.
Packaging
600×600 mm · 8 mm: 5 pcs · 1,80 m² · ≈34 kg / box
600×1200 mm · 8 mm: 3 pcs · 2,16 m² · ≈41,4 kg / box
Conformity
CE · TSE · EN 14411

Colour

Light grey and cream fine veins on a grey-blue ground; a layered, textured look.

Finish

Matt: Standard non-reflective matt surface that hides marks. No slip-resistance class is declared for standard matt; specify R9–R13 finishes where slip resistance is required.

Full Lappato: Fully polished surface with high light reflection that brings out the depth of colour and veining.

Sugar Effect: Semi-polished; a lightly textured surface that sparkles in the light thanks to fine crystal grains.

Technical Properties

Download data sheet (PDF)
PropertyTest standardRequirementDeclared value
Product classTS EN 14411 Annex GGroup BIa (GL)Dry-pressed porcelain tile
Water absorptionTS EN ISO 10545-3E ≤ 0.5%0.15% (average)
Breaking strength (S)TS EN ISO 10545-4≥ 1300 N (≥ 7.5 mm) · ≥ 700 N (< 7.5 mm)2953 N (average)*
Modulus of rupture (R)TS EN ISO 10545-4≥ 35 N/mm²47.4 N/mm² (average)*
Reaction to fire96/603/EC—A1FL (without testing)
Frost resistanceTS EN ISO 10545-12RequiredResistant
Slip resistanceDIN 51130 / DIN 51097—R9–R13 · A/B/C (on request)
Release of dangerous substancesTS EN ISO 10545-15—Pb < 0.1% · Cd < 0.02%

* Declared values are averages of results measured on 600×1200 mm, 9 mm samples from different production batches; values may vary with thickness and size. Images are indicative; shade and pattern variation between faces is a natural characteristic of the product.

Production options for projects

Every product in the collection can be produced in these sizes and finishes, independent of its catalogue size. The minimum order quantity for project-specific production is 5,000 m². Fibreglass mesh backing can be applied to every product as an option (at additional cost).

Available sizes (cm)
30×6045×4560×6060×12080×8090×90120×12080×160
Finishes
Satin mattMattLappatoFull LappatoSugar EffectR9 · R10 · R11 · R12 · R13